Back to the product list
Everest Dry Screw Vacuum Pump "Superscrew" ESP-H 800
Discover the Features & Specifications of SUPERSCREW ESP-H 800
- 660/800 m3/hr NOMINAL DISPLACEMENT (50/60 HZ)
- 0.05 Torr ULTIMATE VACUUM
- 11 KW POWER (CONNECTED)
- 2900 RPM ROTATION
- 15~20 Lts./Min COOLING WATER FLOW
- 3 Lts. GEAR OIL (MINERAL)
- 500 Kg APPROX WEIGHT (BARE SHAFT)
Share
Standard Accessories
- INLET PORT MODULE WITH COMPANION FLANGES & GAUGE POINT
- ELECTROPNEUMATIC ISOLATION VALVE AT SUCTION
- NON RETURN VALVE
- COMMON SKID STRUCTURE
- NITROGEN INLET PURGE/GAS BALLAST MODULE WITH PRESSURE REGULATING VALVE & SOLENOID VALVE
- NITROGEN SEAL PURGE MODULE WITH PRESSURE REGULATING VALVE & SOLENOID VALVE
- SOLVENT FLUSHING MODULE WITH 10 LITRE RECEIVER TANK & SOLENOID VALVE
- SUITABLE ELECTRIC MOTOR
- ELECTRICAL CONTROL PANEL INCLUDING:
- VARIABLE FREQUENCY DRIVE/ INVERTER DRIVE
- PLC LOGIC CONTROLLER
- ISOLATION MCB/MCCB
- ELECTRICAL SWITCHGEAR
- INDICATION LIGHTS WITH ON/OFF & EMERGENCY
- COMPANION FLANGES
- COUPLING & COUPLING GUARD
- BOURDON VACUUM GAUGE WITH SIPHON
- COOLING WATER LINE MODULE WITH VALVE & STRAINER.
Additional Accessories
- HAST-C MECHANICAL SEAL.
- ENP+PEEK (55/60MIC.)
- TCV + TE + CONTROLLER.
- SYNTHETIC LUBRICATION OIL.
- KALREZ O-RING IN M/SEAL.
- ISOLATION VALVE (SS316)
- DISCHARGE SILENCER (SS316)
OPTIONAL ACCESSORIES
- VACUUM TRANSMITTER
- INLET FILTER HOUSING (1 MICRON.)
- INLET FILTER HOUSING (5 MICRON)
- CONDENSER WITH RECEIVER (PRE/POST) (1SQMTR)
CONDENSER WITH RECEIVER (PRE/POST) (2SQMTR) - UPGRADE FROM SS304 TO SS316.
- ELECTRIC MOTOR, PREMIUM EFFICIENCY.
| Nominal Displacement (50/60 Hz) |
660/800 m3/hr |
|---|---|
| Ultimate Vacuum |
0.05 Torr |
| Power (Connected) |
11 KW |
| Rotation |
2900 RPM |
| Cooling Water Flow |
15~20 Lts./Min |
| Gear Oil (Mineral) |
3 Lts. |
| Approx Weight (Bare Shaft) |
500 Kg |
ACCESSORIES
Standard Accessories
- INLET PORT MODULE WITH COMPANION FLANGES & GAUGE POINT
- ELECTROPNEUMATIC ISOLATION VALVE AT SUCTION
- NON RETURN VALVE
- COMMON SKID STRUCTURE
- NITROGEN INLET PURGE/GAS BALLAST MODULE WITH PRESSURE REGULATING VALVE & SOLENOID VALVE
- NITROGEN SEAL PURGE MODULE WITH PRESSURE REGULATING VALVE & SOLENOID VALVE
- SOLVENT FLUSHING MODULE WITH 10 LITRE RECEIVER TANK & SOLENOID VALVE
- SUITABLE ELECTRIC MOTOR
- ELECTRICAL CONTROL PANEL INCLUDING:
- VARIABLE FREQUENCY DRIVE/ INVERTER DRIVE
- PLC LOGIC CONTROLLER
- ISOLATION MCB/MCCB
- ELECTRICAL SWITCHGEAR
- INDICATION LIGHTS WITH ON/OFF & EMERGENCY
- COMPANION FLANGES
- COUPLING & COUPLING GUARD
- BOURDON VACUUM GAUGE WITH SIPHON
- COOLING WATER LINE MODULE WITH VALVE & STRAINER.
Additional Accessories
- HAST-C MECHANICAL SEAL.
- ENP+PEEK (55/60MIC.)
- TCV + TE + CONTROLLER.
- SYNTHETIC LUBRICATION OIL.
- KALREZ O-RING IN M/SEAL.
- ISOLATION VALVE (SS316)
- DISCHARGE SILENCER (SS316)
OPTIONAL ACCESSORIES
- VACUUM TRANSMITTER
- INLET FILTER HOUSING (1 MICRON.)
- INLET FILTER HOUSING (5 MICRON)
- CONDENSER WITH RECEIVER (PRE/POST) (1SQMTR)
CONDENSER WITH RECEIVER (PRE/POST) (2SQMTR) - UPGRADE FROM SS304 TO SS316.
- ELECTRIC MOTOR, PREMIUM EFFICIENCY.
SPECIFICATION
| Nominal Displacement (50/60 Hz) |
660/800 m3/hr |
|---|---|
| Ultimate Vacuum |
0.05 Torr |
| Power (Connected) |
11 KW |
| Rotation |
2900 RPM |
| Cooling Water Flow |
15~20 Lts./Min |
| Gear Oil (Mineral) |
3 Lts. |
| Approx Weight (Bare Shaft) |
500 Kg |