Back to the product list
Everest Dry Screw Vacuum Pumping System "Supervac 1600"
Discover the Features & Specifications of Supervac 1600
- 1600 m3/hr NOMINAL DISPLACEMENT (50/60 HZ)
- 0.01 Torr ULTIMATE VACUUM
- 13 KW POWER (CONNECTED)
- 100 mm NB PORT SIZE SUCTION
- 2 NO. OF STAGES
Share
Standard Accessories
- INLET PORT MODULE WITH COMPANION FLANGES & GAUGE POINT
- ELECTROPNEUMATIC ISOLATION VALVE AT SUCTION
- NON RETURN VALVE
- COMMON SKID STRUCTURE
- NITROGEN INLET PURGE/GAS BALLAST MODULE WITH PRESSURE REGULATING VALVE & SOLENOID VALVE
- NITROGEN SEAL PURGE MODULE WITH PRESSURE REGULATING VALVE & SOLENOID VALVE
- SOLVENT FLUSHING MODULE WITH 10 LITRE RECEIVER TANK & SOLENOID VALVE
- SUITABLE ELECTRIC MOTOR
- ELECTRICAL CONTROL PANEL INCLUDING:
- VARIABLE FREQUENCY DRIVE/ INVERTER DRIVE
- PLC LOGIC CONTROLLER
- ISOLATION MCB/MCCB
- ELECTRICAL SWITCHGEAR
- INDICATION LIGHTS WITH ON/OFF & EMERGENCY
- COMPANION FLANGES
- COUPLING & COUPLING GUARD
- BOURDON VACUUM GAUGE WITH SIPHON
- COOLING WATER LINE MODULE WITH VALVE & STRAINER.
Additional Accessories
- HAST-C MECHANICAL SEAL.
- ENP+PEEK (55/60MIC.)
- TCV + TE + CONTROLLER.
- SYNTHETIC LUBRICATION OIL.
- KALREZ O-RING IN M/SEAL.
- ISOLATION VALVE (SS316)
- DISCHARGE SILENCER (SS316)
OPTIONAL ACCESSORIES
- VACUUM TRANSMITTER
- INLET FILTER HOUSING (1 MICRON.)
- INLET FILTER HOUSING (5 MICRON)
- CONDENSER WITH RECEIVER (PRE/POST) (1SQMTR)
- CONDENSER WITH RECEIVER (PRE/POST) (2SQMTR)
- UPGRADE FROM SS304 TO SS316.
- ELECTRIC MOTOR, PREMIUM EFFICIENCY.
| Nominal Displacement (50/60 Hz) |
1600 m3/hr |
|---|---|
| Ultimate Vacuum |
0.01 Torr |
| Power (Connected) |
13 KW |
| Port Size Suction |
100 mm NB |
| NO. OF STAGES |
2 |
- SUPERVAC 1600 STD
- CONFIGRATION: 600.150
- DISPLACEMENT: 1600M3/HR
- CONNECTED POWER: 13KW
- CONSUMEND POWER: 8.5KW
- ULTIMATE VACUUM: 0.01TORR
- SKID STRUCTURE: STRUCTURAL STEEL
- INTERCONNECTING PIPING : STAINLESS STEEL
ACCESSORIES
Standard Accessories
- INLET PORT MODULE WITH COMPANION FLANGES & GAUGE POINT
- ELECTROPNEUMATIC ISOLATION VALVE AT SUCTION
- NON RETURN VALVE
- COMMON SKID STRUCTURE
- NITROGEN INLET PURGE/GAS BALLAST MODULE WITH PRESSURE REGULATING VALVE & SOLENOID VALVE
- NITROGEN SEAL PURGE MODULE WITH PRESSURE REGULATING VALVE & SOLENOID VALVE
- SOLVENT FLUSHING MODULE WITH 10 LITRE RECEIVER TANK & SOLENOID VALVE
- SUITABLE ELECTRIC MOTOR
- ELECTRICAL CONTROL PANEL INCLUDING:
- VARIABLE FREQUENCY DRIVE/ INVERTER DRIVE
- PLC LOGIC CONTROLLER
- ISOLATION MCB/MCCB
- ELECTRICAL SWITCHGEAR
- INDICATION LIGHTS WITH ON/OFF & EMERGENCY
- COMPANION FLANGES
- COUPLING & COUPLING GUARD
- BOURDON VACUUM GAUGE WITH SIPHON
- COOLING WATER LINE MODULE WITH VALVE & STRAINER.
Additional Accessories
- HAST-C MECHANICAL SEAL.
- ENP+PEEK (55/60MIC.)
- TCV + TE + CONTROLLER.
- SYNTHETIC LUBRICATION OIL.
- KALREZ O-RING IN M/SEAL.
- ISOLATION VALVE (SS316)
- DISCHARGE SILENCER (SS316)
OPTIONAL ACCESSORIES
- VACUUM TRANSMITTER
- INLET FILTER HOUSING (1 MICRON.)
- INLET FILTER HOUSING (5 MICRON)
- CONDENSER WITH RECEIVER (PRE/POST) (1SQMTR)
- CONDENSER WITH RECEIVER (PRE/POST) (2SQMTR)
- UPGRADE FROM SS304 TO SS316.
- ELECTRIC MOTOR, PREMIUM EFFICIENCY.
SPECIFICATION
| Nominal Displacement (50/60 Hz) |
1600 m3/hr |
|---|---|
| Ultimate Vacuum |
0.01 Torr |
| Power (Connected) |
13 KW |
| Port Size Suction |
100 mm NB |
| NO. OF STAGES |
2 |
PRODUCT INFORMATION
- SUPERVAC 1600 STD
- CONFIGRATION: 600.150
- DISPLACEMENT: 1600M3/HR
- CONNECTED POWER: 13KW
- CONSUMEND POWER: 8.5KW
- ULTIMATE VACUUM: 0.01TORR
- SKID STRUCTURE: STRUCTURAL STEEL
- INTERCONNECTING PIPING : STAINLESS STEEL